SenseCAP S2120

In this article we are connecting a SenseCAP S2120 8-in-1 weather station to Nimbus808 solution platform using MQTT.

Install the SenseCAP mobile application by searching “SenseCAP Mate” on your device’s application store or by scanning the following QR code

If you don’t have an account already, create one by following the steps on the App

Install the battery to the device. You can find out how to do it by following this official documentation. After doing so, the red LED will be steady

Turn on your cellphone’s Bluetooth and launch the “SenseCAP Mate” App

Your device will be automatically detected

Select “S2120 Weather Station” among the different options

Tap on the “Setup” button

You might be prompted for a password. The default one is 000000

If your device is not listed, click the “Scan” button to search for it

Once detected, tap on your device

Tap to the Settings tab

Edit the following settings according to your needs/regulations

Keep in mind if you are located on Europe you should select EU_863.

if you are located on India, you should choose IN_865

In the following link you can find out more about each country allowed band and it’s regulations

This guide was developed in a country where the US_902_915 band is the allowed, but remember to change these settings according to your region.

Copy the following values (do not modify any). We’ll use them later:

Click on “Send”